首页 关于德泰科 产品展示 新闻中心 经典应用 人才中心 联系我们
  您现在的位置:德泰科阀门 - 新闻中心 - 行业新闻
   行业新闻
进口电磁阀安装注意事项
发布时间:2012-5-22   来源地:http://www.bjfmc.net

进口电磁阀安装注意事项

进口电磁阀安装注意事项如下:

1电磁阀安装时应注意阀体上箭头应与介质流向一致。不可装在有直接滴水或溅水的地方。电磁阀应垂直向上安装。

2电磁阀应保证在电源电压为额定电压的15%-10%波动范围内正常工作。

3电磁阀安装后,管道中不得有反向压差。并需通电数次,使之适温后方可正式投入使用。

4电磁阀安装前应彻底清洗管道。通入的介质应无杂质。阀前装过滤器。

5、当电磁阀发生故障或清洗时,为保证系统继续运行,应安装旁路装置。

Solenoid valve installed Notes Installation Notes as follows: 1, the installation should pay attention to the arrow on the valve body should be consistent with the medium flow. Can not be directly installed in the dripping or splashing water. Solenoid valve should be installed vertically upward. 2, the solenoid valve should ensure that the supply voltage for the rated voltage of 15% -10% fluctuation range of work. 3, the solenoid valve installed, the pipeline may not have the reverse pressure. And the need to power a few times, so that proper temperature before being put into use. 4, the solenoid valve should be thoroughly cleaned before installing the pipeline. Access the media should be free of impurities. Valve pre-installed filters. 5, when the solenoid valve failure or cleaning, to ensure the system continues to run, you should install the bypass device.

 


 
Copyright 2007 北京德泰科阀门有限公司www.dtyco.net All Rights Reserved.  备案 京ICP备10003115号
地址:北京市大兴工业开发区  电话:010-59430603(3线) 010-57039662 传真:010-60129533 手机:15910656008
月光论坛一元云购一元夺宝奥通一元云购如何炒股票什么减肥药效果最好股票新手入门股票行情网减肥药瑜伽减肥方法